What is the way to detect the waterproof grade of the light touch switch

- Mar 22, 2018-

Waterproof touch switch is an electronic touch switch with waterproof function, waterproof touch switch is widely used, touch switch can be truly waterproof effect, need to reach IP67 grade, IP67 grade refers to the level of security protection switch industry for the general definition refers to an interface for liquid objects such as water and solid object protection ability. The 2 digit behind IP refers to the protection from large particles to dust and from vertical water droplet to bottom pressure, so the greater the two digit number behind IP is, the stronger it is. What is the way to detect the waterproof touch switch and the waterproof grade test for the light touch switch?

Mode 1. It does not damage the deformation for a long time under certain pressure.

Mode two, can be soaked in water for a short time.

Mode three, without damage when flushing directly with water.

Mode four. It can be used in the cabin environment.

Mode five, the rain from 60 or 15 degrees should not be affected on the shell.

Mode six, the drop of water drops on the shell should not be affected.

Mode seven. No corrosive liquid is spilled on the shell.

The waterproof level detection of waterproof and light touch switch is more than a few. If these ways can be passed through, the waterproof touch switch is even more OK. But at the same time, we should also pay attention to the operation principle of the light touch switch, the correct use can make its effect better, longer life.